菜单
  

    外文原文二
    China's mold industry and its development trend
     Die & Mould Industry Status
      Due to historical reasons for the formation of closed, "big and complete" enterprise features, most enterprises in China are equipped with mold workshop, in factory matching status since the late 70s have a mold the concept of industrialization and specialization of production.  Production efficiency is not high, poor economic returns.  Mold production industry is small and scattered, cross-industry, capital-intensive, professional, commercial and technical management level are relatively low.
      According to incomplete statistics, there are now specialized in manufacturing mold, the product supporting mold factory workshop (factory) near 17 000, about 600 000 employees, annual output value reached 20 billion yuan mold.  However, the existing capacity of the mold and die industry can only meet the demand of 60%, still can not meet the needs of national economic development.  At present, the domestic needs of large, sophisticated, complex and long life of the mold also rely mainly on imports.  According to customs statistics, in 1997 630 million U.S. dollars worth of imports mold, not including the import of mold together with the equipment; in 1997 only 78 million U.S. dollars export mold.  At present the technological level of China Die & Mould Industry and manufacturing capacity, China's national economy in the weak links and bottlenecks constraining sustainable economic development.
     1  Research on the Structure of industrial products mold
      In accordance with the pision of China Mould Industry Association, China mold is pided into 10 basic categories, which, stamping die and plastic molding two categories accounted for the main part.  Calculated by output, present, China accounts for about 50% die stamping, plastic molding die about 20%, Wire Drawing Die (Tool) about 10% of the world's advanced industrial countries and regions, the proportion of plastic forming die die general of the total output value 40%.
      Most of our stamping die mold for the simple, single-process mode and meet the molds, precision die, precision multi-position progressive die is also one of the few, die less than 100 million times the average life of the mold reached 100 million times the maximum life of more than accuracy 3 ~ 5um, more than 50 progressive station, and the international life of the die 600 million times the highest average life of the die 50 million times compared to the mid 80s at the international advanced level.
      China's plastic molding mold design, production technology started relatively late, the overall level of low.  Currently a single cavity, a simple mold cavity 70%, and still dominant. A sophisticated multi-cavity mold plastic injection mold, plastic injection mold has been able to multi-color preliminary design and manufacturing.  Mould is about 80 million times the average life span is about, the main difference is the large deformation of mold components, excess burr side of a large, poor surface quality, erosion and corrosion serious mold cavity, the mold cavity exhaust poor and vulnerable such as, injection mold 5um accuracy has reached below the highest life expectancy has exceeded 20 million times, the number has more than 100 chamber cavity, reaching the mid 80s to early 90s the international advanced level.
     2 mold Present Status of Technology
      Technical level of China's mold industry currently uneven, with wide disparities.  Generally speaking, with the developed industrial countries, Hong Kong and Taiwan advanced level, there is a large gap.
      The use of CAD / CAM / CAE / CAPP and other technical design and manufacture molds, both wide application, or technical level, there is a big gap between both.  In the application of CAD technology design molds, only about 10% of the mold used in the design of CAD, aside from drawing board still has a long way to go; in the application of CAE design and analysis of mold calculation, it was just started, most of the game is still in trial stages and animation; in the application of CAM technology manufacturing molds, first, the lack of advanced manufacturing equipment, and second, the existing process equipment (including the last 10 years the introduction of advanced equipment) or computer standard (IBM PC and compatibles, HP workstations, etc.) different, or because of differences in bytes, processing speed differences, differences in resistance to electromagnetic interference, networking is low, only about 5% of the mold manufacturing equipment of recent work in this task; in the application process planning CAPP technology, basically a blank state, based on the need for a lot of standardization work; in the mold common technology, such as mold rapid prototyping technology, polishing, electroforming technologies, surface treatment technology aspects of CAD / CAM technology in China has just started.  Computer-aided technology, software development, is still at low level, the accumulation of knowledge and experience required.  Most of our mold factory, mold processing equipment shop old, long in the length of civilian service, accuracy, low efficiency, still use the ordinary forging, turning, milling, planing, drilling, grinding and processing equipment, mold, heat treatment is still in use salt bath, box-type furnace, operating with the experience of workers, poorly equipped, high energy consumption.  Renewal of equipment is slow, technological innovation, technological progress is not much intensity.  Although in recent years introduced many advanced mold processing equipment, but are too scattered, or not complete, only about 25% utilization, equipment, some of the advanced functions are not given full play.
  1. 上一篇:搅拌器机械密封容器英文文献和中文翻译
  2. 下一篇:反应釜内胆材料316L合英文文献和中文翻译
  1. 数字通信技术在塑料挤出...

  2. CAE技术在车辆安全性应用英文文献和中文翻译

  3. 模具历史英文文献和中文翻译

  4. 嵌入型锚在软硬海底的抓...

  5. 现代快速经济模具制造技术英文文献和咔翻译

  6. 3D注塑模具设计系统英文文献和中文翻译

  7. 基于网络的注塑模具智能...

  8. 中国传统元素在游戏角色...

  9. 江苏省某高中学生体质现状的调查研究

  10. 现代简约美式风格在室内家装中的运用

  11. 上市公司股权结构对经营绩效的影响研究

  12. NFC协议物理层的软件实现+文献综述

  13. C++最短路径算法研究和程序设计

  14. 高警觉工作人群的元情绪...

  15. g-C3N4光催化剂的制备和光催化性能研究

  16. 巴金《激流三部曲》高觉新的悲剧命运

  17. 浅析中国古代宗法制度

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回