- 上一篇：海星公司五层办公楼的空调系统设计+CAD图纸
- 下一篇：源恺国际商业街应用BIM技术的技术标编制
1.摘要本设计为上海颛桥镇141地块22号楼（12层住宅）结构施工图与信息化设计，结构型式为现浇钢筋混凝土剪力墙结构，地上十三层，地下一层，高度为42.335米。建筑采用剪力墙结构，此结构相比框架结构的优势在于，剪力墙结构承受竖向荷载及水平荷载的能力都较大，整体性好，侧向刚度大，水平力作用下侧向位移小，并且由于没有梁、柱等外露与凸出，便于房间内部布置。建筑总体型比较规则，规则的体型不但便于施工，而且有利于结构抗震。46939
设计内容主要为建筑和结构设计。
建筑设计过程主要包括方案的确定和建筑制图。
结构设计过程包括结构方案的确定、结构计算、结构配筋、结构布置和结构制图。
结构方案确定后进行结构计算，学习并运用通用建筑结构设计软件——PKPM建立模型、进行上部结构的整体计算。
依据设计方案按制图标注绘制了建筑施工图。
依据计算结果按制图标准绘制了结构施工图。
毕业论文关键词：现浇钢筋混凝土剪力墙结构，建筑设计，结构设计。
Abstract Residential building, Shanghai ZhuanQiao Town 141 plots No. 22 residential building Architectural and structural design
The design for the building of residential building in Shanghai call Ordinary residential buildings and structure design, structure form for cast-in-situ reinforced concrete shear wall structure, thirteen floors on the ground, the underground layer. Height of 42.335 meters . Building with shear wall structure, this structure compared to the advantages of frame structure is, the shear wall structure under vertical load and horizontal load are larger, overall good, group to lateral stiffness is large, and the horizontal force effect of the underside of the displacement and due to the absence of beam and column exposed and protruded, easy to inner layout of the room.And then the total construction size comparison rules, the rules are not only convenient for construction, but also conducive to the structural seismic.
The main content of the design for the architectural and structural design.
Architectural design process mainly includes the design and the construction drawing.
Structure design process including the structure scheme, structure calculation and structure drawing.
Structure calculation structure plan, learn and apply the general building structure design software -- PKPM model, the upper structure of the integral calculation
According to the design scheme according to the system icon note drawing construction drawing.
According to the calculation results by drawing standard drawing construction drawing.
Key Words：cast-in-place reinforced concrete shear wall system; structure design; architecture design
目录
0 摘要 4
1 建筑设计 6
1.1 设计依据 6
1.2 设计要求 6
1.3 住宅建筑设计 6
1.3.1 平面设计 7
1.3.2 轴网布置： 7
2 结构方案设计 10
2.1 设计依据 10
2.1.1工程设计使用年限 10
2.1.2自然条件 10
2.2 设计要求 10
2.2.1设计条件 10
2.2.2设计荷载 11
2.2.3设计规范及规程