- 上一篇：Er/Ho共掺重金属玻璃的光谱性质研究
- 下一篇：Matlab化工过程比值控制系统设计
摘要：本次设计的课题是年产500万平方米橡胶输送带的车间工艺设计。在输送带需求量增长的大环境下，设计出一家能够满足一定市场需求的普通橡胶输送带的生产厂家。设计采用的输送带生产方法包括生胶的开练，输送带不同胶层的混炼，帆布的压延成型以及挂胶，输送带的硫化等重要的生产过程。设计的主要内容包括设计的概述，其中包含了可行性的研究，设计的依据和程序，设计的主要内容；第二方面是厂址的选择以及厂区的平面布置图；第三方面是工艺设计的选择和流程图的确定；第四方面则是输送带原材料的选择，其中包括了各种助剂在内；第五方面是机械设备的选择，包括选择各种型号的开炼机，密炼机等机械设备；第六部分和第七部分是原材料以及机械设备的计算，包括计算出需要消耗多少的原料和多少的机械设备。第八部分是主要生产车间的布置，包括了原料制造车间，压延车间和硫化车间；第九部分是非工艺设计，主要包含动力，人员，污染治理等方面的内容。设计取得的成果主要有设计说明书和在设计过程中所学到的关于橡胶产品的生产的内容。43770
毕业论文关键词：输送带；工艺设计；硫化；输送带成型
Workshop process design of rubber conveyor belt with an annual output of 5 million square meters
Abstract: The design of the project is an annual output of 5 million square meters of rubber conveyor belt workshop process design. In the large environment of demand growth in the conveyor belt, designed to meet the needs of a certain market, the production of ordinary rubber conveyor belt manufacturers. Design of the conveyor belt production method includes rubber to practice, the conveyor belt with different layer mixing, calendering molding with canvas and hang glue conveying belt vulcanizing important production process. The main content of the design includes an overview of the design, which contains the feasibility study, design basis and procedures, the main contents of the design; The second aspect is the layout of the site selection and site; The third aspect is the selection of process design and the determination of the flow chart; The fourth aspect is the selection of raw materials, including a variety of additives, including; The fifth aspect is the choice of mechanical equipment, including the choice of various models of the opening and internal mixing machine, mixer, mechanical equipment, etc.; The sixth part and the seventh part is the calculation of raw materials and mechanical equipment, including the calculation of the need to consume how much of the raw materials and the number of mechanical equipment; The eighth part is the main production workshop layout, including the manufacturing workshop of raw materials, rolling workshop and vulcanizing workshop; The ninth part is the non process design, mainly contains the power, personnel, pollution control and other aspects of the content. The results of the design are mainly in the design specification and in the design process to learn about the production of rubber products.
Key Words: Conveyer belt；process planning；vulcanization；Conveyor belt forming
目录
目录 iii
1 概述 1
1.1 可行性研究的目的和意义 1
1.2 设计依据和设计程序 3
1.2.1 设计任务书 3
1.2.2 设计的主要内容 3
2
-
日处理50000吨开发区污水处理工程设计+CAD图纸
-
日处理25000立方制革厂污水...
-
日处理2500立米果汁饮料厂...
-
2500立米高炉煤气除尘系统设计+CAD图纸
-
年产20万吨乙二醇中浮阀精馏塔的设计
-
年产20万吨乙二醇换热器设计
-
年产20万吨乙二醇工艺设计
江苏省某高中学生体质现状的调查研究
巴金《激流三部曲》高觉新的悲剧命运
g-C3N4光催化剂的制备和光催化性能研究
中国传统元素在游戏角色...
NFC协议物理层的软件实现+文献综述
C++最短路径算法研究和程序设计
高警觉工作人群的元情绪...
现代简约美式风格在室内家装中的运用
上市公司股权结构对经营绩效的影响研究
浅析中国古代宗法制度