摘要:本课题旨在以企业现有产品氯化亚铜为原料,经氧化得氯化铜,并以此为反应物铜源,制备醋酸铜,即以高纯氯化亚铜为原料,经过双氧水氧化,得到氯化铜溶液,并以此作为铜源,以碳酸钠溶液为沉淀剂,控制适宜的反应条件,得到碱式碳酸铜后,通过添加冰醋酸溶液后结晶过滤得到高纯度醋酸铜,其中母液循环利用可不断结晶,同时碳酸钠也较为便宜易得。考察了反应体系PH、搅拌时间、反应物浓度、反应温度、反应体系介质及添加剂对醋酸铜生产流程的影响。并依据小试工艺要求,进行概念性生产工艺设计,设计过程中,首先进行主要的物料衡算、热量衡算和设备计算,再根据工艺操作的要求和特点,参照相关工艺的资料,绘制工艺流程图,然后根据工艺计算结构设计的最终数据画出主要设备图,之后再进行设备选型,绘制车间布置图。 57961

毕业论文关键字: 氯化亚铜;碳酸钠;碳酸铜;醋酸铜 ,工艺设计

 The Preparation and production of copper acetate

Abstract: This paper aims to to the company's existing product cuprous chloride as raw materials, by oxidation of copper chloride, and taking the opportunity reactant copper source and preparation of copper acetate, with high purity of cuprous chloride as raw material, after the oxidation of hydrogen peroxide, copper chloride solution, and takes it as the source of copper, with sodium carbonate solution as the precipitating agent, optimum conditions of the reaction control, basic copper carbonate, by the addition of glacial acetic acid solution crystallizing, filtering obtained high purity copper acetate, which mother liquor recycling continuous crystallization, also sodium carbonate is relatively cheap and easy to get. The effects of PH, stirring time, reactant concentration, reaction temperature, reaction medium and additives on the production process of copper acetate were investigated. And according to the test process requirements, conceptual design of production process, calculation of the design process, first of all to the main material balance, heat balance and equipment, according to the requirements and characteristics of the operation process, with reference to the related process data, process flow diagram, then according to the process calculation of structure design of the final data to draw a map of major equipment, and then the selection of equipment, drawing workshop layout. 

Key words: cuprous chloride; sodium carbonate; copper; copper acetate process design

目录

1.引言 7

1 醋酸铜应用 7

1.2醋酸铜结构和性质 7

1.3醋酸铜实验室制备 7

1.4醋酸铜工业生产方法 7

1.4.1 直接制备醋酸铜 8

1.4.2  传统工业制法 8

1.4.3直接氧化法 8

1.4.4含Cu2+溶液制备醋酸铜 9

1.4.5铜的化合物制醋酸铜 9

1.5.本文拟采用的方法 9

1.5.1工艺流程 9

1.5..2生产流程图 10

1.5.3原料性质 10

1.5.4中间体性质 11

2.小试工艺研究 11

2.1仪器: 11

2.2小试中各物质物化性质 11

3.2.1原料的物化性质

上一篇:3-羟基-γ-丁内酯的制备
下一篇:日处理12万吨厌氧-缺氧-好氧生物脱氮除磷A2/O法污水处理工艺设计

苯并二噻咯小分子的结构...

萝藦科泰山白首乌中C21甾体苷元的分离与鉴定

HPLC反相液相色谱法在多肽分离中的运用

初中科学教学如何促进初...

金属催化的烯基叠氮参与的反应研究

多巴胺的自聚及其对碳纳米管的改性

SnO2纳米棒阵列膜的制备及光催化性能研究

安康汉江网讯

互联网教育”变革路径研究进展【7972字】

ASP.net+sqlserver企业设备管理系统设计与开发

LiMn1-xFexPO4正极材料合成及充放电性能研究

网络语言“XX体”研究

我国风险投资的发展现状问题及对策分析

麦秸秆还田和沼液灌溉对...

张洁小说《无字》中的女性意识

新課改下小學语文洧效阅...

老年2型糖尿病患者运动疗...