Φ150圆钢环形加热炉设计+CAD图纸
本设计采用高焦炉混合煤气作为环形加热炉的主要燃料。设计计算主要包括：燃料燃烧计算，炉温制度的确定，炉体尺寸的确定，炉体结构的确定，热平衡计算，煤、空气管路系统阻力损失计算，排烟系统阻力损失计算，烟囱高度选取，炉子重要部件选择等部分。最后设计的环形炉性能为：炉子热效率（45.29%），标准燃料消耗量（1229.60kg标煤/h）,单位标准燃料消耗量（40.99kg标煤/t钢），热耗（1201kJ/kg）。
毕业论文关键词：环形加热炉；热平衡；管道阻力
The Design of Annular Heating Furnace for Φ150 Steel Rod
Abstract：This topic mainly aims at the design of annular heating furnace for Φ150 steel rod. It requirements for the design calculation of furnace thermal
calculation and heat balance of the whole system, then design the CAD
drawings. The furnace adopts three sections, pided into preheating section,
heating section, average heating. It is mainly composed coal, air pipe, steel
structure, burner, furnace, heat exchanger, air blower, water cooling components and chimney parts.
This design uses the mixed gas of coke oven as the main fuel annular heating furnace. Design mainly includes: the calculation of fuel burning, determine the furnace temperature system, determine the size of the furnace, determine the furnace structure, heat balance calculation, calculation of coal, air resistance loss of pipeline system, calculation of exhaust system resistance loss, chimney height selection, selection of some important parts of the furnace. The performance of the final design of the annular furnace: furnace thermal efficiency 45.29%), the standard fuel consumption (standard coal 1229.60kg/h), the standard unit of fuel consumption (standard coal 40.99kg /t steel), heat consumption (1201kJ/kg).
Keywords：Annular heating furnace；Heat balance；Pipe resistance
目录
摘要 i
Abstract i
1 前言 1
2 燃料燃烧计算 3
2.1 发生炉煤气低发热值 3
2.2 空气需要量 3
2.3 燃烧产物系列参数 3
2.4 计算燃烧燃烧温度 5
2.5 炉子钢坯数及出钢间隔 6
3综合传热系数计算 7
3.1 确定炉膛主要计算尺寸 7
3.1.1确定炉膛宽度 7
3.1.2确定炉膛高度 9
3.1.3各段炉气包围面积 9
3.1.4各段炉子空腔体积 9
3.1.5计算各段平均有效射线行程 9
3.1.6炉气中CO2和H2O分压 10
3.1.7各段炉气黑度 10
3.1.8炉壁对钢坯表面角系数 11
3.1.9 炉气、炉壁对钢坯表面的综合辐射传热系数 11
3.2 确定环形炉的炉温制度 12
3.3 计算钢坯加热时间 13
3.3.1均热段所需热焓 13
3.3.2加热段所需热焓 14
3.3.3燃料利用系数及钢坯热焓分配 15
3.3.4预热段热流及加热时间 16
3.3.5加热段热流及加热时间 17
3.3.6环形炉总加热时间 18
3.4 确定环形炉各段炉长 18
3.5 确定环形炉主要尺寸 20
下一篇：氨蒸发器的设计+CAD图纸