摘要：本次设计的SHL10-1.25 / 250-A型锅炉的设计是低压小型锅炉，采用双锅筒横置式锅炉。通过设计参数以及参考相关资料，进行初步设计与热力计算。燃料从煤斗下降到炉排，转动炉排，煤炭运送到炉内燃烧。水循环路线：首先从锅筒下部对流管的下部向下锅筒，每下降管进入罐后，再从水壁管上升，进入上锅筒。上下锅筒布置成与对流管束紧密接触，并且使用采用折形的冲刷方式根据烟气流动的方向;在锅炉尾轴上配置铸铁省煤器和空气预热器。主要内容有：燃料燃烧计算，炉设计计算，凝渣管设计设计，过热器设计，锅炉管束设计计算，省煤器设计计算，空气预热器设计计算。这些计算包括各种小型计算项目。燃料燃烧计算包括空气平衡计算，理论烟气和理论空气计算，每个烟道烟气特性的计算，空气焓和烟气焓计算，热平衡计算和燃料烟气消耗计算，炉结构计算，计算传热面积，排渣管结构计算，热容计算，过热器结构计算，热容计算，锅炉管束结构计算，热容计算，省煤器结构计算，热力计算，空气预热器结构计算，热力学计算。该设计包括任务描述，计算说明，炉膛零件图，空气预热器零件图，省煤器零件图。70601

毕业论文关键词: 链条炉  ；锅炉结构设计  ；热力计算

Design of SHL 10-1.25 / 250 - A  boiler

Abstract: This design SHL10-1.25 / 250-A type boiler belongs to the low pressure small boiler, uses the double drum horizontal type boiler. Fuel from the coal bucket down to the grate, turn the grate, the coal transported to the furnace burning. Water circulation route: first from the lower part of the drum tube convection tube down to the lower drum, after each drop tube into the tank, and then from the water wall tube rise, into the upper drum. The upper and lower drums are arranged in close contact with the convective tube bundle, and in accordance with the direction of the flue gas flow using the folding way; in the boiler tail shaft is arranged cast iron economizer and air preheater. The main contents are: fuel combustion calculation, furnace design calculation, design of slag pipe design, design of superheater, boiler tube bundle design calculation, economizer design calculation, air preheater design calculation. These calculations include a variety of small computational items. The fuel combustion calculations include air balance calculations, theoretical flue gas and theoretical air calculations, calculation of flue gas characteristics in each flue, flue enthalpy and flue enthalpy, Heat balance calculation and calculation of fuel flue gas consumption, calculation of furnace structure, calculation of heat transfer area, calculation of slag pipe structure, calculation of heat capacity, calculation of superheater structure, calculation of heat capacity, calculation of boiler tube bundle structure, calculation of heat capacity, economizer structure calculation, heat Calculation, air preheater structure calculation, thermodynamic calculation.The design includes task description, calculation instructions, boiler body diagram, air preheater part drawing, economizer part drawing. 

Key words: chain furnace boiler ; structure design ; thermodynamic calculation

目录

摘要…………1

Abstract 2

目录

1 绪论 1

2 锅炉结构简述 2

2.1 方案设计 2

2.2 锅炉结构以及特性 3

3 热力计算 4

3.1 空气平衡计算