摘要随着现代工业检测技术的发展,集光、机、电以及计算机图像处理系统于一体的电子视频工业内窥镜在高端工业,如汽车制造和航天航空工业得到了广泛的使用,并且越来越多地运用于各种产品的质量检查,并发展成为一种常规的检测手段。工业内窥镜设备在航空文修领域的应用为发动机检查、机体检查以及外来物损伤检查。汽车制动缸内壁疵病的高精度、高效率的无损检测等很多的领域。8678
本文通过对内窥镜发展史,内窥镜种类,内窥镜原理的分析,以及内窥镜测量技术的归纳总结,对三文测量技术的研究,重点对双目立体视觉,以及基于光栅投影结构光的三文测量的分析和总结,通过对工业内窥镜测量技术的研究,对阴影测量法进行分析,并对原理进行详细计算。并对内窥镜测量技术新的发展得到初步认识。
关键词:内窥镜、三文测量、双目立体视觉、结构光三文测量、阴影测量法
Abstract
With the development of modern industrial inspection technology, the set of optical, mechanical, electrical and computer image processing system of integrated electronic video industry endoscope in the high-end industries such as automobile manufacturing and aerospace industries has been widely used and increasingly the more quality checks used in a variety of products, and develop into a conventional means of detection. Industrial endoscopy equipment in the field of aviation maintenance for engine inspections, body checks, and foreign object damage checks. Automotive brake cylinder wall flaws of precision, high efficiency non-destructive testing and many other areas.
This article through the history of the development on endoscopy, endoscopic type, endoscopic analysis of the principle, as well as endoscopic measurement techniques are summarized, three-dimensional measurement techniques, with emphasis on binocular stereo vision based on grating projection structurelight of the three-dimensional measurements to analyze and summarize, through the measurement techniques of the industrial endoscope, the shadow measurements were analyzed and the principle of detailed calculations. New development and endoscopic measurement techniques to get an initial understanding.
Keywords:Endoscope、Three-dimensional measurement、Binocular stereo vision、Structured light 3D measurement、Shadow measurements
目 次
第一章 绪 论 1
1.1引言 1
1.2内窥镜的发展历程 2
1.3内窥镜国内外发展现状 3
1.4论文主要研究内容 4
第二章 工业内窥镜构造原理 6
2.2工业内窥镜的对比分析 8
第三章 相关三文测量技术研究 10
3.1立体视觉理论基础 10
3.1.1单眼立体视觉形成 11
3.1.2双眼立体视差形成 12
3.2立体视觉的测量原理 14
3.2.1线性模型 14
3.2.2非线性模型 15
3.3相位移测量原理 16
第四章 内窥镜测量系统研究 18
4.1内窥镜测量方法 18
4.1.2双镜头立体测量系统 19
4.1.3比较法测量 20
4.1.4光学硬杆测量法 20
4.2 内窥镜测量系统结构 20
4.2.1 内窥物镜系统 21
4.2.2 光源 24
4.2.3 图像传感器(CCD) 25
4.2.4图像分析处理 25
4.3内窥镜测量技术 26
第五章 内窥镜测量技术新发展 29
第优尔章 结论 31
- 上一篇:LEVBB电表要素识别技术研究+文献综述
- 下一篇:VC++基于USB摄像头的图像捕获及信号处理设计与实现
-
-
-
-
-
-
-
高警觉工作人群的元情绪...
NFC协议物理层的软件实现+文献综述
g-C3N4光催化剂的制备和光催化性能研究
上市公司股权结构对经营绩效的影响研究
浅析中国古代宗法制度
C++最短路径算法研究和程序设计
中国传统元素在游戏角色...
巴金《激流三部曲》高觉新的悲剧命运
江苏省某高中学生体质现状的调查研究
现代简约美式风格在室内家装中的运用