菜单
  
    摘要随着无线通信应用的大规模普及,无线电频带资源的缺乏,传统无线通信系统需要得到新的突破和发展。无线通信如何有效的利用频带资源,又灵活多样,能适应各种应用环境,成为研究的热点。软件无线电可以改进性能并扩展功能集,降低了应用成本,同时也使设计方法得以改变。扩频通信相对于传统的窄带通信,在频谱利用率上也有明显的优势,是无线通信系统中的关键技术。扩频通信具有抗干扰、抗衰落以及抗侦察等特点,在军事舰载通信中得到广泛应用。本论文研究了扩频通信系统的组成和工作原理,分析了m序列的产生机理和频谱特性,讨论了序列设计的一般原则,采用数腔振荡器、数字解调、匹配滤波技术等技术,实现了对直序扩频系统的仿真。10512
    关键词  m序列  直序扩频系统  匹配滤波器   数腔振荡器
    毕业设计说明书(论文)外文摘要
    Title    Research and Implementation of Spreading Spectrum and                    
     Dispreading Techniques in the Wireless Transceiver.                                         
    Abstract
    As the popularization of radio communication, the increasing need for co-operation and the lack of radio spectrum resource, traditional radio communication can not satisfy the need of development and facing innovation and breakthrough. How to use the spectrum effectively and how to adapt to all kinds of application environment becomes a hot topic. The software radio technology put forward a feasible way to solve it, its low cost and multi-function becomes a focus. It also changes the method of designing. Direct sequence spread spectrum is a key technology in the intending communication system. Spread spectrum communication has characteristics of anti-interference, anti-fading, and is therefore widely used in military carrier communications. In this paper, the composition and working principle of spread spectrum communication system is researched. It also analysis the generation mechanism, spectral characteristics of the m sequence,and the general principles of the sequence design. The technologies of digital demodulation, digital  matched  filter and numerical controlled oscillator, are employed.
    Keywords  m sequence  DS-SS communication  DMF   NCO
    目  录
    1 绪论        1
    1.1 扩频通信概述    1
    1.2 当前国内外研究水平概述    1
    2 扩展频谱通信技术    3
    2.1 概念与基本原理    3
    2.2 扩频系统的指标、特点、分类    5
    2.3 直序扩频    8
    3 频率合成技术    11
    3.1 原理与应用    11
    3.2 DDS设计    11
    4 扩频序列设计    17
    4.1 伪随机序列的概念与性质、伪随机序列的选取原则    18
    4.2 m序列的性质与产生机理    19
    4.3 m序列的实现    19
    4.4 其它伪随机序列的介绍    25
    5 调制        26
    5.1 模块设计    26
    5.2 调制方案的实现和对比    26
    6 接收机设计与实现    29
    6.1 同步    29
    6.2 匹配滤波器DMF的设计和实现    32
    6.3 二进制差分相移键控(2DPSK)解调    37
    结论    39
  1. 上一篇:MATLAB脉间二相编码脉冲串信号分析仿真
  2. 下一篇:TMS320C6713基于DSP的数据采集程序设计
  1. FHA和PHA的交叉验证技术在...

  2. MATLAB中继选择方案设计与仿真

  3. 激光通信中的大气光学信道模型仿真

  4. SDR软件无线电的通信系统原理仿真

  5. MIMO干扰限制的无线中继系统性能仿真程序

  6. 显微镜图像中的细胞分割方法研究

  7. 压缩感知理论及在雷达声...

  8. 上市公司股权结构对经营绩效的影响研究

  9. 巴金《激流三部曲》高觉新的悲剧命运

  10. g-C3N4光催化剂的制备和光催化性能研究

  11. NFC协议物理层的软件实现+文献综述

  12. 中国传统元素在游戏角色...

  13. 江苏省某高中学生体质现状的调查研究

  14. C++最短路径算法研究和程序设计

  15. 高警觉工作人群的元情绪...

  16. 现代简约美式风格在室内家装中的运用

  17. 浅析中国古代宗法制度

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回