[12] Sanadi A, Caulfield D F, Rowell R M. Lignocellulosic/plastic composites. The Fibril Angle, Spring, 1998: 8-12

[13] Jacques M S. An analysis of thermal warpage in injection molded flat parts due to unbalanced cooling. Polymer Engineering & Science, 1982, 22(4): 241-247

[14] Cheng X M, Zhou L, Sheng N Y, et al. Injection Molding and Warpage of Thin-Walled Parts Based on Simulated Deformation International Conference on Computational Intelligence and Software Engineering. IEEE, 2009: 1-4

[15] Ozcelik B, Sonat I. Warpage and structural analysis of thin shell plastic in the plastic injection molding. Materials & Design, 2009, 30(2): 367-375

[16] Liao S J, Chang D Y, Chen H J, et al. Optimal process conditions of shrinkage and warpage of thin-wall parts. Polymer Engineering & Science, 2004, 44(5): 917-928

[17] Kim H J, Hong J O, Lee K H, et al. Thermoviscoelastic simulation of thermally and pressure-induced stresses in injection moulding for the prediction of shrinkage and warpage for fibre-reinforced thermoplastics. Journal of Non-Newtonian Fluid Mechanics, 1999, 84(2- 3): 159-190

[18] Chang T C, Iii E F. Shrinkage behavior and optimization of injection molded parts studied by the taguchi method. Polymer Engineering & Science, 2001, 41(5): 703-710

[19]  黄虹.  塑料成型加工与模具.  化学工业出版社, 2003

[20]  任露泉.  试验优化设计与分析.  高等教育出版社, 2003

[21]  张成军.  实验设计与数据处理.  化学工业出版社, 2009

[22]  池成忠.  注塑成型工艺与模具设计.  化学工业出版社, 2010

[23]  宋满仓,  周茂军,  杨林,  等.  注塑模具设计.  电子工业出版社, 2010