摘要:当今的信息通讯领域,无线以其便捷快速的优势,已经开始渐渐的取代有线,成为信息工程研究的一个重要的目标。随着无线传感器网络技术的发展,用于设计无线网络的网络协议也逐渐地多元化,无线局域网(WLAN)、蓝牙(BlueTooth)技术、无线保真(WiFi)、超宽带(UWB)以及Zigbee技术等技术相继出现,均展现出各自的应用特点和市场潜力。无线传感器网络技术也因此逐渐的受到了我们的关注。27817
另一方面,在科学技术地不断发展的推动下,红外热成像测温技术也得到了很大发展。红外热成像测温系统是一种的热图像成像和温度测温装置,利用目标与环境之间热对比度不同,把红外辐射能量密度的分布探测出来,然后显示在屏幕上,成为“热像”,再根据获取的灰度图像的灰度值,显示出该处对应的温度。
本毕业论文研究了无线测温以及红外热成像测温技术的原理和方法,结合这两种技术的特点,设计出了一种基于红外成像测温技术的无线测温系统。
毕业论文关键词:红外成像;无线测温;zigbee
Abstract:In today's society it is a mainstream trend that wired replaced by wireless in the field of information and communication, transfer information in a convenient and rapid way has become an important research goal of information engineering. With the development of wireless, the wireless network used to design protocol also gradually persified, such as wireless local area network (WLAN), BlueTooth (BlueTooth) technology, wireless fidelity (wi-fi), ultra wideband (UWB) and successive Zigbee technology, they both show their application characteristics and market potential. In this way, the wireless sensor network technology approaches into our field of vision.
On the other hand, under the impetus of the development in science and technology, the infrared thermal imaging temperature measurement technology has also obtained great development. Infrared thermal imaging temperature measurement system is a kind of thermal imaging and temperature measuring device, image by using the thermal contrast between target and environment is different, the infrared radiation energy density distribution of detection, then displayed on the screen, become the "hot", again according to get gray image grey value, the corresponding temperature showed here.
This paper studied the wireless temperature measurement and the principle and method of infrared thermal imaging temperature measurement technology, combining the two technologies, a general planning of wireless temperature measuring system was proposed based on infrared imaging temperature measurement technology.
Key words: infrared imaging, wireless temperature measurement and zigbee
目录
1 绪论
1.1课题的研究背景1
1.2课题的研究意义1
2 数控机床热变形相关理论
2.1热传递的三种基本方式2
2.2数控机床的热误差3
2.3机床热变形过程5
3 测温技术的发展与研究现状
3.1 测温方法6
3.2 温度传感器9
3.3 国内外研究现状9
3.3.1 国内研究现状及发展 10
3.3.2 国外研究现状及发展 12
3.4 发展方向 12
4 测温系统设计
4.1红外热成像测温技术12
4.1.1 红外测温原理 12
4.1.1.1 红外辐射原理 13
4.1.1.2 探测像元输出与物体温度关系 13
4.1.2 红外热成像测温技术的发展现状 15
4.2无线测温系统19
4.2.1 无线传感器网络技术 19
4.2.1.1无线传感器网络技术简介 19
- 上一篇:51单片机轨道温度和间距测试仪的设计+PCB电路图
- 下一篇:MDA及SDA家用电器性能分析
-
-
-
-
-
-
-
江苏省某高中学生体质现状的调查研究
中国传统元素在游戏角色...
g-C3N4光催化剂的制备和光催化性能研究
巴金《激流三部曲》高觉新的悲剧命运
C++最短路径算法研究和程序设计
现代简约美式风格在室内家装中的运用
上市公司股权结构对经营绩效的影响研究
高警觉工作人群的元情绪...
NFC协议物理层的软件实现+文献综述
浅析中国古代宗法制度