- 上一篇：STM32四轴飞行器的设计
- 下一篇：PLC电梯集选控制系统设计
摘要：本文主要进行西安石化总厂110kV变电站的改造和进一步设计。首先根据任务书提供的系统及路线和所有负载的参数，通过对所设计变电站及负载资料分析,确定了110kV、10.5kV侧主接线的形式。在符合国家设计标准的同时，本次设计还考虑了当地的实际情况。在本次的设计中，包括对变电站总体分析和负荷分析、变电站主变压器的选择、电气主接线、电气设备选择、短路电流计算等部分的分析计算以及防雷设计。本次设计正文分设计说明书和设计计算说明书两个部分，设计说明书包括变压器选择、电气设备选择、配电装置选择和防雷和接地方案设计；设计计算书包括变压器选择、短路电流计算、一次二次设备选择及校验等，并附有电气接线图及其它相关图纸。52708
毕业论文关键词： 110kV变电站；主变压器；短路电流；设备选择
Transformation design of 110kV substation in Xi'an petrochemical plant 1
Abstract:This paper mainly written for the reforming and design of the 110kV substation of Xi'an Petrochemical General Factory. First of all, According to the system and the route of the task book and the parameters of all the load, through the design of substation and the analysis of load data . We determined the main wiring form of 110kV and 10.5kV. On the basis to meet the national standard of design, the design as far as possible to consider the local actual situation. In this design, including the substation overall analysis and load analysis,main transformer selecting, Electrical main wiring, Electrical equipment selecting , The calculation of Short-circuit current and Lightning protection design. This design is pided into two parts, Design specification and Design calculation specification. Design specification include Transformer selection description, Electrical equipment selection instructions, Design of power distribution system, Lightning protection design. Design calculation specification include Transformer selection, calculation of short-circuit current, Electrical equipment selection and calibration. With electrical wiring diagram and other related drawings.
Keyword: 110kV transformer substation;Main Transformer;Short-circuit current;Equipment selection
目录
1 绪论 1
1.1 变电站概述 1
1.2.1 国内研究现状 1
1.2.2 国外研究现状 1
1.3 我国变电站及其设计发展趋势 1
1.3.1我国变电站的发展趋势 2
1.3.2 我国变电站设计的发展趋势 2
1.4 变电站设计原理 2
2 原始资料 3
2.1 建筑性质及规模 3
2.2 负荷资料 3
3 负荷分析 4
3.1 负荷计算的目的 4
3.2 负荷分析 4
3.3 主变压器的确定 4
3.4 所用变选择 5
4 电气主接线设计 6
4.1 基本要求 6
4.2 设计原则 6
4.3 110kV侧接线的选择 7
4.4 10.5kV侧接线的选择 8
5 短路电流计算