摘要本文通过静电纺丝技术结合乙二胺胺解 PLLA 方法制备表面具有多孔结构和内部具备 连续贯穿的多孔结构的氨基化 POM/PLLA 纤维,并采用 SnCl2/PdCl2 对纤维表面活化处 理,从而得到有 Pd 纳米种子为活性位点的纤维,再利用葡萄糖原位还原方法得到负载 Ag 纳米粒子的 POM/PLLA/Ag 纤维。通过 SEM、TEM 表征纤维表面、断面的结构形貌, 探究了溶液浓度、纺丝电压、组分配比等因素对 POM/PLLA 纤维的结构形貌的影响,优 选静电纺丝工艺试验条件。同时还考察了还原负载时间对 Ag 纳米粒子的尺寸、分散程度的 影响。通过 SEM、TEM 对 Ag 纳米粒子负载前后的纤维状态进行表征,同时利用 XPS、 TGA、XRD 对 Ag 纳米粒子的化学价态、晶型结构和负载量等进行表征。该纤维在室温下 催化还原对硝基苯胺,转化率达 99。7%,反应速率常数为 21。25×10-3s-1。当重复使用 4 次 时,其催化率仍在 99%以上;当连续催化 240min 后,对硝基苯胺的转化率仍高于 90%。88622

In this article, electrostatic spinning technology combined with ethylenediamine aminolysis methods were adopted to prepare an aminolyed POM/PLLA fiber with a porous structure on the surface and a continuous through porous structure inside。 In addition, fibers were treated with SnCl2/PdCl2 to activate their surface, to get a fiber with Pd nanoparticles seeds as the active sites。 Furthermore, we used glucose as reducing agent to get POM/PLLA/Ag fibers loading Ag nanoparticles in situ。 Scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to study the morphologies of the fiber membranes, the influence of solution concentration, spinning voltage, ratio of components to the morphologies of POM/PLLA fiber membranes were studied and the optimum conditions for electrostatic spinning process test were determined。 Meanwhile we also studied the influence of the reduction load time to the dispersion degree and the size of Ag nanoparticles。 Through SEM, TEM, the state of fibers before and after loading Ag nanoparticles were characterized, at the same time, we used XPS, TGA, XRD to study the chemical valence state, crystal structure and load of Ag nanoparticles。 The fiber

catalytic reduction of nitro aniline at room temperature, the conversion rate was 99。7%, and the reaction rate constant was 21。25×10-3  s-1。 After reuse for 4 times, its

catalytic rate is still over 99%。 After the continuous catalytic for 240 min, the conversion rate of paranitroaniline is still higher than 90%。

毕业论文关键词:聚甲醛; 聚乳酸; 银纳米粒子; 化学催化源Q于D优G尔X论V文Y网wwW.yOueRw.com 原文+QQ75201`8766

Keyword: Polyoxymethylenes; Poly (L-lactide); Ag nanoparticles; Chemical catalysis

1

1 引言 4

2 实验部分 5

2。1 实验仪器 5

2。2 实验试剂 5

2。3 试样制备 6

2。3。1 制备 POM/PLLA 复合材料 6

2。3。2 氨基化 POM/PLLA 纳米纤维膜的制备 6

2。3。3 Ag 纳米粒子负载在氨基化的 POM/PLLA 纳米纤维膜 6

2。4

上一篇:聚合物凝胶电解质的制备及性能研究
下一篇:基于碳纳米管的聚甲醛成核剂的设计与合成

基于碳纳米管的聚甲醛成核剂的设计与合成

BCC-Fe中螺位错与Cu纳米团簇...

锡酸锌纳米材料制备及其结构表征

纳米复合薄膜的制备与表征

液液界面法改性富勒烯纳米一维结构

氧化钨纳米阵列薄膜制备及其性能研究

Fe-Cr合金纳米析出相的粗化机制与动力学关联

安康汉江网讯

新課改下小學语文洧效阅...

ASP.net+sqlserver企业设备管理系统设计与开发

网络语言“XX体”研究

我国风险投资的发展现状问题及对策分析

老年2型糖尿病患者运动疗...

互联网教育”变革路径研究进展【7972字】

LiMn1-xFexPO4正极材料合成及充放电性能研究

张洁小说《无字》中的女性意识

麦秸秆还田和沼液灌溉对...