菜单
  
    摘要本文采用无皂乳液聚合法制备出聚苯乙烯(PS)微球,并且利用PS胶晶模板法合成具有三文有序大孔(3DOM)结构的Fe2O3金属氧化物骨架。通过SEM结果表明:PS微球粒径均一,表面无明显杂质,并且均匀有序的排列在玻璃基底上,测量出PS微球直径约为300nm;3DOM Fe2O3呈现出大孔结构排列有序,周期性强的多孔网状结构。大孔直径约为200nm,孔壁厚度约为30nm。结合溶胶-浸渍法制备了3DOM结构的Co3O4@Fe2O3核壳型复合金属氧化物材料,通过SEM、XRD、EDS等仪器对不同Co3O4前驱液浓度对所得样品的微观形貌以及各组分摩尔比进行表征。结果表明,前驱液浓度越大制备出的核壳材料的壳越厚,所占摩尔百分比越大。最后对所制备的3DOM Co3O4@Fe2O3复合金属氧化物对高氯酸铵(AP)的催化性能进行了研究。DSC分析表明:3DOM Co3O4@Fe2O3使得AP的热分解温度大大降低,且随着Co3O4壳厚度的增加,对AP热分解催化效果也随之提高。28489
    关键词  三文有序大孔材料   胶晶模板   高氯酸铵   热分解
    毕业论文设计说明书外文摘要
    Title    Preparation and application of nano-composite   metal oxide                                  
    Abstract
    In this article, 3DOM Fe2O3 membrane were synthesised by Polystyrene (PS) colloidal crystal template,which were synthesised by free emulsion polymerization method. From the results of SEM, the PS colloidal spheres had good monodispersed with an average diameter. 3DOM Fe2O3 had well-ordered periodicity and homogeneous pore diameters. 3DOM Fe2O3 had excellent periodic and well-ordered structure. Then, 3DOM Co3O4@Fe2O3 were prepared by sol-gel method. The results of SEM、XRD and EDS indicated the relationships of concentration of precursors and the morphology and the molar ratio of core and shell. It can be confirmed that the shell thickness and the molar ratio of core to shell increased with the rising of concentrations of precursors. Finally,the thermal decomposition effects of 3DOM Co3O4@Fe2O3 on AP were studied by DSC. It can be found that with the increasing of Co3O4 shell, the catalysis effects of 3DOM Co3O4@ Fe2O3 on AP were improved
    Keywords  Three-dimensional macroporous materials   colloidal crystal template      ammonium perchlorate   thermal decomposition
    目   次
    1    绪论..... 1
    1.1研究背景和意义    1
    1.2 三文有序大孔材料制备的介绍    2
    1.2.1聚苯乙烯微球的制备方法    3
    1.2.2  胶晶模板的制备    3
    1.2.3 前驱体的选择    3
    1.2.4  胶晶模板的填充    5
    1.2.5胶晶模板的去除    5
    1.3 本文主要研究内容    5
    1.3.1本学位论文具体研究内容包括以下三个方面:    5
    2. 复合金属氧化物中Fe2O3骨架的制备与表征    6
    2.1 聚苯乙烯(PS)球的制备与胶晶模板的制备与表征    6
    2.1.1聚苯乙烯微球的制备    6
    2.1.2胶晶模板的制备    6
    2.1.3胶晶模板的表征    6
    2.2三文有序Fe2O3骨架的制备与表征    6
    2.2.1实验所需仪器和药品    6
    2.2.2 Fe2O3骨架的制备    7
    2.2.3 Fe2O3骨架的表征    7
    2.3 本章小结    9
    3 三文有序大孔Co3O4@ Fe2O3薄膜的制备及表征    10
    3.1不同浓度的Co3O4前驱液的配置    10
  1. 上一篇:在有序介孔碳修饰电极上析出铀
  2. 下一篇:金属/金属氧化物型高热剂的制备与性能研究
  1. 水热法制备SnO2纳米颗粒和性能研究

  2. ZnO/碳纳米复合纤维的制备...

  3. 铁酸铋纳米颗粒制备和气敏性

  4. sol-gel制备Sr掺杂的LaFeO3纳米颗粒和气敏性能

  5. 不同温度生物炭对重金属...

  6. Co3O4和Fe3O4/WO3纳米材料的合...

  7. 金属有机框架MIL-100(Fe)的金...

  8. 巴金《激流三部曲》高觉新的悲剧命运

  9. C++最短路径算法研究和程序设计

  10. 上市公司股权结构对经营绩效的影响研究

  11. 浅析中国古代宗法制度

  12. 江苏省某高中学生体质现状的调查研究

  13. 现代简约美式风格在室内家装中的运用

  14. 中国传统元素在游戏角色...

  15. g-C3N4光催化剂的制备和光催化性能研究

  16. NFC协议物理层的软件实现+文献综述

  17. 高警觉工作人群的元情绪...

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回