菜单
  
    摘要:本次论文主要讨论研究,以硝酸铜、硝酸铈为原料,草酸为沉淀剂,通过固相法、沉淀法和采用 PEG 隔离的固相法这三种方法制备 CuO-CeO2催化剂,并将所得催化剂均匀分为三份,分别在马弗炉中进行不同温度的焙烧(500℃,650℃和 800℃)4小时,得最终所需的CuO-CeO2催化剂。分别对这些催化剂进行CO活性评价测试和H2-TPR 表征。H2-TPR表征的实验结果表明,在制备方法相同的情况下,焙烧温度越高,催化剂还原性能越差,即,500℃焙烧所得的催化剂拥有最佳活性;在焙烧温度相同的情况下,固相法和沉淀法所制备的催化剂还原性能相近,而加入 PEG的催化剂则还原性能大大降低。CO活性评价测试的实验结果与H2-TPR 表征的实验结果相符。同一制备方法所得的催化剂,随着焙烧温度的升高,催化剂对CO的氧化性越差,同一焙烧温度下的催化剂,固相法和沉淀法所得催化剂对 CO 氧化性能相近,而加入 PEG 的催化剂则催化氧化性能大大降低。 56999
    毕业论文关键字:CuO-CeO2催化剂;催化氧化;H2程序升温还原;CO活性评价
    Comparison of CuO-CeO2 catalysts prepared by solid state method and precipitation method and their CO oxidation activity
    Abstract: This paper mainly study and discuss that, the CuO-CeO2 catalysts prepared by the solid state method, the precipitation method and the solid state used PEG while copper nitrate and cerium nitrate as raw materials and oxalic acid as the precipitating agent. Then those catalysts will be pided into three parts which will be respectively calcined at muffle furnace  for 4 hours at different temperature  (500℃,  650℃  and 800℃), and we will get the CuO-CeO2 catalysts we want. These CuO-CeO2 catalysts will be characterized by using H2-TPR technologies and be investigated  by a microreator-GC  for  the catalytic activity of the  low-temperature CO  oxidation. The result of the H2-TPR technologies reports that, when the preparation methods are the same, the higher the calcined  temperature, the lower the catalysts’  reduction performance is. In the other words, the catalysts  calcined at  500℃  has the best reduction performance. When  at the same calcined  temperature, the reduction performance of the catalysts prepared by the solid state method and the precipitation method is close, however because of the using of the PEG, the reduction performance of  the product  prepared by  the third method reduces greatly. The result of the  CO oxidation match with the H2-TPR’s. The catalysts prepared by the same method, with the  calcined  temperature rising, the catalytic activity of the low-temperature CO oxidation is lower, while the catalysts calcined at the same temperature,  the catalysts prepared by the solid state method and the precipitation method has the similar catalytic activity of the low-temperature CO oxidation, however the catalyst involved PEG has the poor catalytic activity of the low-temperature CO oxidation.
    KeyWords:CuO-CeO2 catalysts;catalytic oxidation;H2-TPR;CO oxidation    

    目录 

    1 前言   1 

    1.1 研究背景.  1 

    1.2 研究进展.  1 

    1.2.1  贵金属/二氧化铈催化剂.  2 

    1.2.2  非贵金属/二氧化铈催化剂   3 

    1.3 方案论证.  5 

    2 实验部分 .  6 

    2.1 实验仪器及设备、原料与试剂.  6 

    2.1.1 实验仪器及设备  6 

    2.1.2  实验试剂  6 

    2.1.3  实验气体  6 

    2.2 催化剂制备  7 

    2.2.1  固相反应法..  7 

    2.2.2  沉淀法.  7 

  1. 上一篇:聚合物对纳米乳液表面修饰研究
  2. 下一篇:包覆精油的脂质体制备技术研究
  1. 水热法制备SnO2纳米颗粒和性能研究

  2. WnCu团簇的结构和性能研究

  3. 铁酸铋纳米颗粒制备和气敏性

  4. sol-gel制备Sr掺杂的LaFeO3纳米颗粒和气敏性能

  5. 不同温度生物炭对重金属...

  6. Co3O4和Fe3O4/WO3纳米材料的合...

  7. 球形颗粒堆积方法研究电极有效性质

  8. 巴金《激流三部曲》高觉新的悲剧命运

  9. g-C3N4光催化剂的制备和光催化性能研究

  10. 上市公司股权结构对经营绩效的影响研究

  11. 高警觉工作人群的元情绪...

  12. 中国传统元素在游戏角色...

  13. 江苏省某高中学生体质现状的调查研究

  14. NFC协议物理层的软件实现+文献综述

  15. 现代简约美式风格在室内家装中的运用

  16. C++最短路径算法研究和程序设计

  17. 浅析中国古代宗法制度

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回