车载折臂式液压升降台设计+CAD图纸
本设计采用的逆向工程方法，对现有的各种的液压升平台比较分析，要点是在传统的结构设计的基础上加以强度校核，受力分析；保持一般液压升降平台的线控方式，即按键控制，开始按键时，升降台上升或者下降，直到到达指定位置，松开按键立即停止，人工按键采用单路八通控制方式；在原有的液压升降平台基础上，改进人工拖动液压升降平台为自动控制的支撑腿为液压缸驱动。
毕业论文关键词：液压系统，折臂
Abstract
The application of the vehicle mounted hydraulic lift platform is very extensive, and is a tool for the high working ability of shops, factories, docks, offices and building decoration industry..This design uses PLC programming to control, in order to improve the automation and flexibility of the equipment operation. Secondly, the hydraulic lift platform with four legs of the arm design for the balance of the use of hydraulic cylinder driven, not only saves the manpower, but also improve the working efficiency of the platform. Moreover, the design of the other hydraulic lifting platform is different from the height of its lifting height control monitoring, improve the accuracy of its movements. The design process uses the method of intensity calculation, carries on the accurate computation to the spare parts, optimizes the spare part material and its structure. Finally, through the stress analysis to determine the arm in the process of movement required to withstand the maximum force for safety analysis. Analysis for improving the reliability, increase the stability of the whole system.
This design uses the method of reverse engineering, the existing hydraulic lift platform comparative analysis, the point is on the basis of the traditional design of the structure to be strength check and stress analysis; keep the wire control mode of hydraulic lifting platform, namely, key control, start button, the lifting platform rise or fall, until you reach the designated position, release the button to stop immediately, the artificial keys using single channel eight control mode; in the original hydraulic lifting platform based on improved artificial drag hydraulic lifting platform for automatic control of the supporting leg for hydraulic cylinder drive.
Keywords: hydraulic system, folding arm
目 录
1 绪 论 1
1.1 液压升降台在机械工业中的使用情况及相关技术 1
1.1.1结构设计 2
1.1.2受力分析和强度计算 2
1.1.3 PLC控制技术 3
1.1.4液压传动技术 3
1.1.5 车载折臂式液压升降台在机械行业中的应用 4
1.2 本课题研究的目的及意义 4
2 车载折臂式液压升降台的结构设计 5
2.1折臂的结构设计 5
2.2 支腿的结构设计 9
3 液压系统的设计方案 10
3.1确定系统的形式 10
上一篇：家用清扫机器人的设计+CAD图纸
下一篇：双输入减速差速器试验台设计