塑性敏感元件高度自动测量仪研制+文献综述
基于此，研制一台塑性敏感元件高度自动测量仪。该测量仪由机械机构、高度测量系统和软件系统等几部分组成。机械机构用来夹持传感器；高度自动测量系统利用光栅位移传感器完成对塑性敏感元件的变形量的测量，传感器输出模拟信号，经过调理电路整形成方波，CPLD和单片机完成数据的计数和储存功能；上位机软件完成数据接收、数据判读等功能。
关键词 塑性敏感元件 高度测量 光栅传感器6234
毕业设计说明书（论文）外文摘要
Title The Development of the Height Automatic Measuring System of the Plastic Sensitive Element
Abstract
Chamber pressure is one of the important parameters which must be measured in firing weapon's design, manufacture and checking. For more than a hundred years, the method of plastic deformation for measuring pressures has been the main means to test the chamber pressure because of its advantages of reliability, convenience and low price. The traditional method of testing the height of the plastic deformation is fussy, and needs expending a lot of manual work, besides, in the traditional testing height the fault is created easily.
Accordingly, the height automatic measuring system of plastic sensitive elements is designed. The system is made up of mechanical structure, height testing system and software and so on. The mechanical structure is used to clamping sensor. The highness after shooting of the plastic sensitive elements is measured by the grating displacement sensor in height testing system. Complete data after the conditioning circuit shaping a square wave, CPLD and microcontroller counts and storage functions. The data reception, date conversions are realized by PC software.
Keywords Plastic sensitive elements, Height measurement，Grating Displacement Sensor
目录
1 引言 1
1.1本课题研究的目的和意义 1
1.2 塑性敏感元件测压工作原理 2
1.3 塑性测压传统判读的缺点 2
1.4 本文的主要结构 3
2. 总体设计 3
2.1 参数指标 3
2.2 自动测量仪的总体方案 4
2.3 传感器的选择 5
3. 高度测量仪的硬件设计 8
3.1 信号调理电路 8
1、滤波电路 8
2、整形电路 9
3.2 CPLD处理模块 10
1、时钟电路 11
2、复位电路 12
3、配置电路 12
3.3 电源转换电路 13
3.4 单片机电路设计 14
1. 单片机时钟电路 15
2. 单片机复位电路 16
3. 单片机通信电路 17
3.4 串口通信电路 18
3.5 硬件电路板设计 19
4. 软件系统设计 20
4.1 CPLD软件设计 21
4.1.1 细分辨向 21
4.1.2 可逆计数模块 22