U盘盖注塑模具设计
本次我的毕业设计的题目是U盘盖的注塑模具设计。这个课题要求在综合考虑产品的结构工艺性的基础上，合理的设计模具的整体结构，完成设计模具的浇注系统的设计，制作合格的塑型零件结构，设计正确的推出机构，完成冷却系统的制作、并在此基础上选择合适的注射机，加以校核。本次的设计是以PRO/E和AutoCAD2014作为工具。这两款软件在模具设计过程中有很好的实用性，便于直观的进行模具三文造型的设计，以及二文零件图的生成，在设计过程中还可以利用软件对模具是否会发生干涉等现象进行观察，以便很好的避免在制造过程中会出现各种不合理的现象。
毕业论文关键词：PRO/E，模具技术，注射成型，模具设计和制造。
ABSTRACT Mold Technology is a very comprehensive subject, which is one of the rapid development in recent years. Especially as representative of the Plastic Mold develops rapidly much more.Even the majority of the products can’t depart from mold technology in the current life , Which reveals its obvious importance. With the development of the mold manufacturing industry ,lots of enterprises begin to seek after improving quality and efficiency, shortening the cycle of design and manufacture, reducing the cost, improving strain capacity of the mold design and manufacturing maximumly as targets etc.
The topic of my graduation project is: U disk cover injection mold design. The product structure technology based on the mould structure, specific mould gating system, the structure of its molding part, Finally the application in the design process, PRO/E and AutoCAD2014 software for the structural design of the injection molding and calculates and draws out the mould assembly diagrams, and drawing of the main parts. And make sure that the mould structure of reliability, rationality, practicality.
KEY WORDS: PRO/E，Mold Technology, Injection Molding, Mold Design and Manufacturing.
目录
上一篇：CCGA器件结构优化设计
下一篇：中等磨损刀具车削温度测试的试验