基于PVDF的传感器设计及实验研究
本文利用PVDF压电薄膜优良的性能特性，利用ANSYS仿真软件进行数值仿真分析，按照PVDF传感器机械部件的尺寸要求，完成该传感器的结构设计。之后，根据PVDF传感器的设计尺寸，运用AutoCAD绘图软件进行图纸绘制，进行PVDF传感器的实物制作，并给出该PVDF传感器的制作以及装配流程。在制作完成后，运用现有的试验装置对其进行试验，通过对传感器的标定试验，得出相应的试验结果及其性能特性。最后通过对所设计传感器进行试验测试，试验分析结论基本符合设计要求，所设计的PVDF传感器可靠可用。21145
关键词 PVDF压电薄膜 传感器 数值仿真 标定试验 试验分析
毕业论文设计说明书（论文）外文摘要
Title Design and experimental study of PVDF-based sensor
Abstract
Sensor and sensor technology is an important symbol to measure a country's comprehensive national strength, and is one of the three major pillars of the modern information technology, which is a measure of the level of an important symbol of national science and technology development level and degree of modernization. PVDF piezoelectric material is the piezoelectricity of the best organic polymer material found so far. It has the quality of a material soft, thin, light weight, high sensitivity, fast response, large measuring range, high chemical stability, low production cost, easy processing and processing, light weight, and many other performance advantages. After its discovery, since a lot of research and application, makes PVDF sensors become widely applied as a modern new smart sensor.
In this paper， by using PVDF piezoelectric film excellent performance features， using ANSYS simulation software for numerical simulation analysis, and in accordance with the dimensional requirements of PVDF sensor mechanical parts to complete the structural design of the sensor. Then, according to the design size of PVDF sensor, carry on the drawing by using AutoCAD software. PVDF sensors perform physical production, and gives the PVDF sensor and assembly process. After completion of production, using the test device of the existing carries on the experiment, through the calibration of sensors, educes the corresponding experiment result and the performance characteristics. Finally, through the testing experiment on the designed sensor, test results accord with the design requirements, the designed PVDF sensor reliably available.
Keywords PVDF piezoelectric film ,Sensor ,Numerical simulation
Calibration test , Test analysis
目 次
1 绪论 1
1.1 传感器的发展概况 1
1.2 传感器的性能指标 1
1.3 简述传感器的标定与校准 2
2 压电式传感器的相关概念 7
2.1 压电效应和压电材料 7
2.2 压电式传感器的原理 9
上一篇：低放稀土渣中氡析出的估算与测定