- 上一篇：年产1万吨二氯甲烷氯化吸收工段设计+图纸
- 下一篇：磁性壳聚糖功能复合微球的制备研究
2 Design Principles
Advanced technology, reasonable economical input, waste water, waste gas and waste solid disposal are always the typical topics.
(1)Design project including simple process, contracted equipment, convenient control and good quality product was first considered.
(2)Low cost (cost in investment and maintenance) and high efficient process must be considered.
(3)Considering raw material resources and plant scale, the source should be sufficient, convenient and low cost.
(4)Understanding the physical and chemical properties of raw materials and products.
3 Technical Introductions
(1)Product Introduction
Acetaminophen, shortly named as APAP, is an orderless white crystalline powder with slight bitter taste. Its density is 1.293g/cm3 and m.p. is 169-170.5℃. Acetaminophen can be dissolved in organic solvents such as methanol, acetone, ethyl acetate, hot water etc., but it can hardly be dissolved in cold water and ethyl ether.
APAP is an antipyretic analgesic with antiphlogistic and antiviral function. Compared with Aspirin, APAP is better in many aspects such as antipyretic effect, side effect etc. It also can be used for synthesizing pharmaceutical.
(2)Main Reaction Equation:
(3)Synthetic method
Now in China the one-step synthesis with iron powder as a reductant has been adopted, because the cost is high and the iron pollution is hard to treat. In recent years, developed countries use the hydrogenation process, especially catalytic hydrogenation
and one-step synthesis, to replace the iron powder reduction. The one-step synthesis does not need to separate PAP intermediate, shortens the craft route and reduces the oxidation of PAP. Also, it needs fewer procedures, saves the energy and reduces the pollution.
In this chapter we focus on that PAP is acetated to APAP by two-steps synthesis.
(4)Procedure
This design mainly involves three main steps: acylation, refining and dry. The following is the details.
Compounding: Matching of material based on fixed ratio under given condition.
Acylation: Acylating raw material matched under given condition.
Crystallization: Cooling solution acetated with cool water in cooling pan, then filtrating by centrifuge.
Decolorization: Decolorizing for gloss crystal with active carbon, then filtrating.
Crystallization.
Dry and packing.
目 录
1绪论 1
1.1 选题依据 1
1.2文献综述 1
1.2.1 对乙酰氨基苯酚简介 1
1.2.2 对乙酰氨基苯酚物化性质 2
1.2.3 国内外研究的概况、水平 2
1.2.4 发展趋向 3
1.2.5 合成路线 3
1.3 方案论证 7
2 工艺流程 9
2.1 主反应方程式 9
2.2 生产工艺流程 9
3 物料衡算 11
3.1 物料衡算总依据 11
3.2 各主要工序的物料衡算 11
3.2.1 酰化的设计依据和物料衡算 11
3.2.2 酰化冷却结晶设计依据和物料衡算 13
3.2.3 溶解脱色设计依据和物料衡算 15
3.2.4 精制冷却结晶设计依据和物料衡算 17
3.2.5 干燥设计依据和物料衡算 18
3.2.6 浓缩锅设计依据和物料衡算 19
3.2.7 酸母液浓缩后冷却结晶设计依据和物料衡算 20
3.2.8 蒸发器设计依据和物料衡算 21
3.2.9 精馏设计依据和物料衡算 22
3.3 物料衡算图 23
4 化工设备的计算及选型 24
4.1 反应器设备的计算及选型 24
-
不同温度生物炭对重金属...
-
天然沸石对水中磷酸根离子吸附研究
-
紫外光吸收剂对沥青涂料耐老化性能的影响
-
OA油酸对K2SiF6:Mn4+形貌及发光性能影响研究
-
油酸对K2SiF6:Mn4+形貌及发光性能影响研究
-
冶金粉尘对铜离子的吸附性能研究
-
蜂窝状催化剂对脱硝性能的影响
上市公司股权结构对经营绩效的影响研究
江苏省某高中学生体质现状的调查研究
g-C3N4光催化剂的制备和光催化性能研究
巴金《激流三部曲》高觉新的悲剧命运
浅析中国古代宗法制度
现代简约美式风格在室内家装中的运用
NFC协议物理层的软件实现+文献综述
高警觉工作人群的元情绪...
C++最短路径算法研究和程序设计
中国传统元素在游戏角色...