摘要:本文以凹凸棒土(ATP)为载体,通过原位沉积,结合冷冻干燥、程序焙烧工艺在其表面负载类石墨相氮化碳(g-C3N4),随后将制备好的Cd0。5Zn0。5S复合在ATP/g-C3N4表面,制备了一系列不同质量分数的ATP/g-C3N4-Cd0。5Zn0。5S(质量分数w%=Cd0。5Zn0。5S:ATP/g-C3N4=15%、25%、35%、45%、50%、55%、65%)复合材料。采用XRD,SEM,BET,UV-vis、IR等分析手段对产物进行了表征,研究表明制备的ATP/g-C3N4-Cd0。5Zn0。5S复合材料负载效果好、比表面大。以可见光光催化降解甲基橙为探针,研究ATP/g-C3N4-Cd0。5Zn0。5S的光催化性能,考察了不同质量分数的Cd0。5Zn0。5S对其光催化性能的影响。结果表明:与纯ATP和g-C3N4相比,ATP/g-C3N4-Cd0。5Zn0。5S复合材料的光催化性能得到明显提高,且Cd0。5Zn0。5S的质量分数不同,ATP/g-C3N4-Cd0。5Zn0。5S光催化性能不同;当质量分数w%=50%时,降解120min后,MO的降解率达到96。0%。91371

毕业论文关键词:石墨相氮化碳,Cd0。5Zn0。5S,可见光催化,凹凸棒土

Abstract: In this paper, the Attapulgite (ATP) is set as the carrier of g-C3N4 to prepare ATP/g-C3N4 composite by in-situ deposition, freeze-drying and calcination。 Then a series of different mass fraction of Cd0。5Zn0。5S were deposited onto ATP/g-C3N4 to prepare ATP/g-C3N4-Cd0。5Zn0。5S (mass fraction w% = Cd0。5Zn0。5S: ATP/g-C3N4  = 15%, 25%, 35%, 45%,

50%, 55%, 65%)。 The products were characterized by XRD, SEM, BET, UV-vis and FTIR。 The results show that g-C3N4 is well coated on the surface of the ATP, meaning that the original structure of the ATP maintained and the specific surface area of the g-C3N4 increased obviously。 In addition, the Cd0。5Zn0。5S particles are also uniformly dispersed onto ATP/g-C3N4。 The photocatalytic activity of different mass fraction composites is investigated by using visible-light degradation of methyl orange as probe。 The results show that ATP/g-C3N4-Cd0。5Zn0。5S composites exhibit excellent visible light photocatalytic properties。 After illuminate 2 hours, the composite materials exhibit the best photocatalytic performance with the mass fraction of Cd0。5Zn0。5S fixed at 50% and the degradation rate of methyl orange reached to 96。0%。源G于J优L尔V论N文M网WwW.youeRw.com 原文+QQ75201`8766

Key words: g-C3N4, Cd0。5Zn0。5S, Visible light photodecomposition, Attapulgite, In-situ deposit

目录

1前言 1

2实验内容 2

2。1试剂和仪器 2

2。2 复合光催化剂的制备方法 2

2。2。1 改性ATP的制备 2

2。2。2 ATP/g-C3N4的制备 2

2。2。3 Cd0。5Zn0。5S的制备 3

2。2。4 ATP/g-C3N4-Cd0。5Zn0。5S的制备 3

2。3 材料表征 3

2。4 材料光催化性能测定 3

3 结果与讨论 4

3。1 表征谱图分析 4

3。1。1 XRD谱图分析 4

3。1。2 SEM分析 5

3。1。3

上一篇:ATP/g-C3N4-Cd1-xNixS复合光催化剂的制备及其性能研究
下一篇:质量控制图在分析化学实验考核中的应用

ATP/g-C3N4-Cd1-xNixS复合光催化...

凹凸棒土-ZnFe2O4-BiOBr复合材...

凹凸棒土/g-C3N4-Co3O4复合光...

原子转移自由基聚合法制...

有机-无机纳米复合渗透汽化脱水膜研究进展

Au-HS/SO3H-PMO(Et)纳米复合材...

温敏性凹土/聚偏氟乙烯复...

体育学院学生耐力素质的现状及对策研究

加速度存储测试技术国内外研究现状

移动机器人头部及上肢结构设计开题报告

不考虑应力历史的地基沉降程序任务书

党的群众路线教育实践活...

实施计划生育政策的背景...

學信息技术以后能做什么...

基于小波变换的数字水印技术的研究+程序

儿童玩具店加盟店排行榜...

干秸秆乳酸发酵物有机酸含量分析