菜单
  
    摘要:通过包结络合法[1]制备乙酸薄荷酯与β-环糊精的包合物。研究了乙酸薄荷酯与β环糊精之比、搅拌反应的时间、温度和转速对乙酸薄荷酯与β-环糊精的包合物包结能的影响。用红外光谱仪( IR)对乙酸薄荷酯与β-环糊精的包合物的性能进行了表征。结果表明: m(乙酸薄荷酯):m(β-环糊精) = 1:13,实验表明在转速为600r/min,温度为55℃的条件下反应1.5个小时所制备的乙酸薄荷酯与β-环糊精的包合物最为理想。通过XRD图谱分析表明乙酸薄荷酯被成功包埋进β-环糊精里,并用热重分析仪测得β-环糊精以及乙酸薄荷酯与β-环糊精的包合物的热重曲线,计算得到乙酸薄荷酯与β-环糊精的包合物的装载量为8.36%。35568
    毕业论文关键词:乙酸薄荷酯;β-环糊精;纳米香精胶囊
    Study of binding energy of Menthyl acetate Loaded β-Cyclodextrin Nano Capsule
    Abstract: Menthyl acetate loaded β-cyclodextrin(β-CD) nanoparticles were prepared by the Inclusion Complexation Method. We studied the influence to the particle size and and flavor capsule size distribution of nanoparticles which was related to the ratio of water and alcohol, flavor and wall materials, the time of reaction, stirring speed and reaction temperature. The menthyl acetate loaded β-cyclodextrin nanoparticles fabric flavoured were characterized by Infrared Spectrometer ( IR ), Thermogravimetric Analyzer ( TGA )and X-ray diffraction(XRD).
    Results showed that fragrance loading capacity was 8.36% when m(fragrance): m(Wall Materials) = 1:13, reaction time was 1.5h, rotational speed was 600r/min and reaction temperature was 55℃.The release rate of Menthyl acetate loaded by β-cyclodextrin nanoparticles was decreased under the high temperature.It is proved that Menthyl acetate loaded by β-cyclodextrin nanoparticles through X-ray diffraction.
     Keywords: Menthyl acetate;β-cyclodextrin(β-CD); nanoparticle;
    目录
    1绪论    5
    1.1本课题国内外研究现状概述    6
    1.1.1β-环糊精的结构与性质    6
    1.1.2 微胶囊的结构与性质    7
    1.1.3 乙酸薄荷酯的性质    8
    1.1.4 β-环糊精包覆香精胶囊的制备机理    9
    1.1.5β-环糊精与香精包合物的主要制备方法    9
    1.2本课题的研究目的和意义    10
    2 实验部分    12
    2.1 试剂及仪器    12
    2.1.1 实验材料和试剂    12
    实验所用材料和试剂见表2.1    12
    2.2β-环糊精与乙酸薄荷酯包合物的制备和表征    12
    2.2.1 实验工艺流程.    12
    2.2.2β-环糊精与乙酸薄荷酯包合物的制备过程.    13
    2.2.3单因素实验.    13
    2.2.4 乙酸薄荷酯和β-环糊精包合物的表征.    14
    2.2.4.1乙酸薄荷酯和β-环糊精包合物的红外表征    15
    2.2.4.2 乙酸薄荷酯和β-环糊精包合物的装载量的测定    15
    2.2.4.3 XRD图谱分析    16
    3 实验结果与讨论    17
    3.1乙酸薄荷酯与β-环糊精包合物制备的单因素试验    17
    3.2红外光谱分析    18
    3.3热重分析    20
    3.4β-环糊精和乙酸薄荷酯与β环糊精包合物的XRD图谱分析    21
    3.5β-环糊精和乙酸薄荷酯与β环糊精包合物的包结能的测定    23
    4 结论    25
    致谢    26
    参考文献    27
    β-环糊精与乙酸薄荷酯的包结能的研究
  1. 上一篇:温和的简易方法制备Eu3+ Y2SiO5纳米晶的研究
  2. 下一篇:炭化温度对TiO2/C杂化气凝胶性能的影响
  1. 栗壳吸附质生物质活性炭的制备与应用

  2. PS-b-PHEMA及其双组分嵌段共...

  3. PS-b-PNIPAM单组份及其双组份...

  4. Cu配合物的合成与分离乙烯/乙烷的性能研究

  5. 柔性多羧酸配体TCOPM与CoⅡ...

  6. 复合金属氧化物Fe2O3NiO及...

  7. PNGV锌镍单液流电池储能体系建模与仿真

  8. 中国传统元素在游戏角色...

  9. 浅析中国古代宗法制度

  10. 现代简约美式风格在室内家装中的运用

  11. 上市公司股权结构对经营绩效的影响研究

  12. C++最短路径算法研究和程序设计

  13. 高警觉工作人群的元情绪...

  14. g-C3N4光催化剂的制备和光催化性能研究

  15. NFC协议物理层的软件实现+文献综述

  16. 江苏省某高中学生体质现状的调查研究

  17. 巴金《激流三部曲》高觉新的悲剧命运

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回