气动式热熔成型装置的设计+CAD图纸
毕业论文关键词: 自动；热熔；电加热；气压；成型
The design of pneumatic hot-melt molding device
Abstract：
Pneumatic hot-melt molding device is the combination of machine, electricity, atmospheric pressure and PLC technology for the integration of an automated equipment. The main parts of equipment are feeding device, pressing molding device, the electric heating device and a frame. Conveying products, hot melt molding products by pneumatic drive and PLC technology to finish and control, an operator only needs to place the product in the specified location, can realize the automatic feeding and automatic hot melt forming a series of action. The overall layout of hot-melt molding device for gas in the paper. The scheme design, function and structural characteristics of the main components of the one one analysis and elaboration, the feeding device is driven by the movable cylinder, block and the lock cylinder positioning and clamping, mold products will be sent to the working position. The driving pressure molding device comprises a pressure cylinder, the electric heating device is a special hot melt molding product. In this paper, the design calculation and selection of main components, drew up the principle diagram of pneumatic system.
Keywords: Automatic;hot melt;electrical heating;
atmospheric pressure;molding
目 录
1. 绪论 1
1.1 简述 1
1.2 气动式热熔成型装置的国内外研究现状 2
1.3 课题研究目的和意义 3
1.4 课题研究的内容 3
2. 气动式热熔成型装置简介及工作原理 5
2.1 气动式热熔成型装置简介 5
2.1.1 研究的设计要点 5
2.2 气动式热熔成型装置工作原理 7
3. 气动式热熔成型装置的方案拟定 8
3.1 热熔成型装置的组成 8
3.1.1 机械装置 8
3.1.2 传动装置 8
3.1.3 控制装置 8
3.1.4 检测装置 9
3.2 热熔成型装置的总体布局 9
3.2.1 热熔成型装置动作循环的方案拟定 9
3.2.2 热熔成型装置的总体布局 10
3.3 送料装置的方案拟定 10
3.3.1 送料装置驱动方式的方案拟定 10
3.3.2 送料装置定位方式的方案拟定 12
3.3.3 下模的结构设计 14
3.4 压紧成型装置的方案拟定 15
3.4.1 压紧成型装置驱动方式的方案拟定 15
3.5 电加热装置的方案拟定 16
3.5.1 加热系统的加热形式 16
3.5.2 方案的比较与确定 17
3.6 电加热装置结构设计 17
4. 气动式热熔成型装置气压传动系统的设计计算 18
下一篇：继电器盒注塑模设计+CAD图纸