菜单
  

    As for the choice of the recipe design and shape methods, in order to improve the tensile strength, rigidity and chemical stability of the products, join the sticks together to the raw materials to improve their performance. And by comparing extrusion blow molding and injection blow molding the pros and cons and select extrusion blow-molded to the design of the overall process. In order to ensure that products of the wall thickness uniformity and to prevent continuous extruder transition when unprocessed because of their self-esteem reaching into the large or the products cooling excessive, and ultimately taking the intermittent extrusion blow molding method.
    In the total technical process, referenced and compared to the correlation books, I draw up the total flow charts and add the concrete explanations. According to the plastic machine design standard, we can take the flow refinement to explain on craft pretreatment, craft formation. And select the related type equipment by correlation description and technical parameter arrangement.
    In the gas transfer network design, to transports the amount of wind, the wind speed and the transportation density carries on the computation, guarantees its craft transportation the integrity and smooth, considered the pressure loses, and finally choose the XGB turbine wheel type air pump.
    In the material balance, determined first the operating time, then through the conservation relations, the product specification and the cycle period determination extruding machine and mixer productivity and the corresponding quantity, simultaneously displays in each process the product output, the loss and the waste product quantity, in order to finally determine raw material the amount of use.
    In the energy balance, through the energy balance figure lists which extruder molding machine and mold part of the energy related calculations to determine the usage of the cooling water and the chilled water. And then further determine the usage of raw material, and conclude that the power consumption for the design and auxiliary equipment.
    In the workshop non-technological design, this design has also fully considered the question of personal security and the environmental protection, and determines personnel arrangement of production organization. In the production process, it requests workers should obey the working instruction strictly. To the environmental protection aspect, also control the waste water and the noise emissions strictly.
    In the economic accounting, I make the product cost estimate by the estimate the expense of project equipment to this design, preparing for full for the product going on the market localization.
    In the final of the design is the layout of the workshop, which introduces the workshop composition and design principles simply. Through the power supply, the storage material, the stacking between the equipment such as the design and production of emissions from the plant, we can determine the size of the workshop.
    目录
    1    绪论    1
    1.1    文献综述    1
    1.2    设计的目的和意义    3
    1.3    设计规格    4
    2    配方设计及成型方法的选择    5
    2.1    配方设计    5
    2.2    成型方法的选择    13
    3    总工艺流程    16
    3.1    总工艺流程说明    16
    3.2    预处理    17
    3.3    成型工艺    22
    4    气力输送网络的设计与计算    43
    4.1    输送风量    43
    4.2    输送风速    43
    4.3    输送风量及输送浓度    43
  1. 上一篇:DZ444合金的高温氧化行为的研究+文献综述
  2. 下一篇:年产70万Kg多钢种微型轴承的热处理车间设计
  1. 年产160万吨冷连轧薄板带钢车间设计

  2. 年产25万只聚乙烯吹塑桶车间工艺设计

  3. 有机发光塑料的制备及表征

  4. 年产200万吨高炉车间工艺设计

  5. 年产5000吨埋地排污管材车间工艺设计

  6. 年产80万吨棒材生产车间设计

  7. 年产2000吨锌白铜板带车间工艺设计

  8. g-C3N4光催化剂的制备和光催化性能研究

  9. 上市公司股权结构对经营绩效的影响研究

  10. 现代简约美式风格在室内家装中的运用

  11. 高警觉工作人群的元情绪...

  12. 巴金《激流三部曲》高觉新的悲剧命运

  13. 江苏省某高中学生体质现状的调查研究

  14. 中国传统元素在游戏角色...

  15. C++最短路径算法研究和程序设计

  16. NFC协议物理层的软件实现+文献综述

  17. 浅析中国古代宗法制度

  

About

优尔论文网手机版...

主页:http://www.youerw.com

关闭返回